Comentários do leitor

Tips on How to Repair a LCD Samsung Galaxy Core

por Jetta Solorio (2021-11-23)


This article will explain how to easily repair Samsung Galaxy Core problems. After reading this you should have no problem in performing a simple task that anyone can do. A few days ago, my Samsung Galaxy S6 Edge stopped working completely. I opened it up and found out that the screen was dirty and there were dead pixels all over. This is when I realized that the problem must be a cracked screen. Luckily, I had the right tools for this job at hand.


In order to clean the Samsung Galaxy S6 Edge front camera, you need to remove the battery first. If you have an S Pen or a click wheel then you need to pull it out first. Once you have both of them out, place the screen on your paper and draw a straight line down the middle. Do not forget to write the width, height and length of the area you just marked. With the marker and pen, mark along the line and remove the battery.


Next, take out your pen or stylus and use it to write on the display. Make sure that the tip of your pen is above the white line that you drew and also make sure that it is directly underneath the image of the phone. Use the paper roll to catch any ink and then wipe the pen or stylus dry. Should you have almost any concerns concerning wherever and the best way to use samsung galaxy phone accessories, you can e-mail us in our own page. The next step is to take out your Samsung Galaxy S6 edge's back glass and use a small screwdriver to pry it loose from the rest of the back. Your Samsung Galaxy Core's back is held in place by a plastic tab so be sure that you can easily remove it.


With the back free, remove the battery but do not remove the display yet. Use the small flat head screwdriver to pry the display away from the back glass with a very steady grip. You will see that there is a tab at the bottom of the display. Take out this tab and gently slide it towards the back of the phone, which moves the battery out. Your Samsung Galaxy Core has now been replaced by the luego.


Now it is time to check the LCD brightness. Turn the brightness to its maximum and use the Spy application to see if your screen is really bright. If not, then you need to replace the screen or have it exchanged. Another thing to check is if the altavoz interno is working properly. You need to attach a meter reader to find out how long the connection lasts and how accurate the reading is.


The battery should last at least ten hours so if you think that your battery life is already running low, you should replace the LCD screen. If you feel that the phone is still working fine, you can continue with the above steps to replace the battery. As previously stated, this process can be made easier by following steps mentioned in this article. The process can be divided into two parts, removing the lcd screen first and then the second part installing the new lcd screen. It is important to note that you should disconnect all devices such as the ear phone, mobile phone chargers and other things before proceeding with this process